Cutting Hand Tools » milling http://www.cuttinghandtools.com Mon, 31 Oct 2011 17:05:16 +0000 http://wordpress.org/?v=2.9.2 en hourly 1 Half Round Router Bit 1/2″ x 1/2″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/half-round-router-bit-12-x-12-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/ http://www.cuttinghandtools.com/half-round-router-bit-12-x-12-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/#comments Mon, 11 Oct 2010 05:37:21 +0000 CuttingHandTools http://www.cuttinghandtools.com/half-round-router-bit-12-x-12-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/ 413iTIvWuIL. SL160 Half Round Router Bit 1/2 x 1/2 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/2″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B: 1/2″
    D: 1-3/16″
    D1:
    H:
    L1:
    R: 1/4″
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Half Round Router Bit 1/2″ x 1/2″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/half-round-router-bit-12-x-12-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/feed/ 0 Round Carving Router Bit 1/2″ x 7/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/round-carving-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/ http://www.cuttinghandtools.com/round-carving-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/#comments Sat, 02 Oct 2010 05:09:22 +0000 CuttingHandTools http://www.cuttinghandtools.com/round-carving-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/ 31nC68nTnoL. SL160 Round Carving Router Bit 1/2 x 7/8 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/2″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B:
    D: 1″
    D1:
    H: 7/8″
    L1:
    R: 7/16″
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Round Carving Router Bit 1/2″ x 7/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/round-carving-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/feed/ 0 Roman Ogee Router Bit With Bearing 1/4″ x 3/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/roman-ogee-router-bit-with-bearing-14-x-38-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-tabl/ http://www.cuttinghandtools.com/roman-ogee-router-bit-with-bearing-14-x-38-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-tabl/#comments Tue, 02 Feb 2010 00:20:58 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/roman-ogee-router-bit-with-bearing-14-x-38-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-tabl/ 21PReZsuVzL. SL160 Roman Ogee Router Bit With Bearing 1/4 x 3/8 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/4″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B: 3/16″
    D: 7/8″
    D1:
    H: 5/16″
    L1:
    R: 3/32″
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Roman Ogee Router Bit With Bearing 1/4″ x 3/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/roman-ogee-router-bit-with-bearing-14-x-38-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-tabl/feed/ 0 Straight Router Bit With Bearing 1/4″ x 5/16″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/straight-router-bit-with-bearing-14-x-516-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/ http://www.cuttinghandtools.com/straight-router-bit-with-bearing-14-x-516-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/#comments Mon, 01 Feb 2010 18:36:46 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/straight-router-bit-with-bearing-14-x-516-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/ 11NMGwo6p4L. SL160 Straight Router Bit With Bearing 1/4 x 5/16 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/4″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B:
    D: 5/16″
    D1:
    H: 1-3/16″
    L1:
    R:
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Straight Router Bit With Bearing 1/4″ x 5/16″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/straight-router-bit-with-bearing-14-x-516-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/feed/ 0 Ogee Router Bit With Bearing 1/4″ x R3/16″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/ogee-router-bit-with-bearing-14-x-r316-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-ro/ http://www.cuttinghandtools.com/ogee-router-bit-with-bearing-14-x-r316-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-ro/#comments Mon, 01 Feb 2010 13:44:22 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/ogee-router-bit-with-bearing-14-x-r316-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-ro/ 41VCLgSM1eL. SL160 Ogee Router Bit With Bearing 1/4 x R3/16 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/4″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B: 3/8″
    D: 1-1/4″
    D1:
    H: 9/16″
    L1:
    R: 3/16″
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Ogee Router Bit With Bearing 1/4″ x R3/16″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/ogee-router-bit-with-bearing-14-x-r316-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-ro/feed/ 0 Open End Carving Router Bit 1/2″ x 3/4″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/open-end-carving-router-bit-12-x-34-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-route/ http://www.cuttinghandtools.com/open-end-carving-router-bit-12-x-34-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-route/#comments Mon, 01 Feb 2010 09:03:54 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/open-end-carving-router-bit-12-x-34-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-route/ 41yUc0VL3hL. SL160 Open End Carving Router Bit 1/2 x 3/4 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/2″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B: 7/16″
    D: 3/4″
    D1:
    H:
    L1:
    R: 3/8″
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Open End Carving Router Bit 1/2″ x 3/4″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/open-end-carving-router-bit-12-x-34-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-route/feed/ 0 Flat Bottom Cutter Router Bit 1/2″ x 7/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/flat-bottom-cutter-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-rou/ http://www.cuttinghandtools.com/flat-bottom-cutter-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-rou/#comments Mon, 01 Feb 2010 04:07:29 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/flat-bottom-cutter-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-rou/ 11XtmOkFNQL. SL160 Flat Bottom Cutter Router Bit 1/2 x 7/8 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/2″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B:
    D: 7/8″
    D1:
    H: 1/2″
    L1:
    R: 3/16″
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Flat Bottom Cutter Router Bit 1/2″ x 7/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/flat-bottom-cutter-router-bit-12-x-78-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-rou/feed/ 0 Classical Moulding Router Bit 1/2″ x 1-1/4″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/classical-moulding-router-bit-12-x-1-14-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-r/ http://www.cuttinghandtools.com/classical-moulding-router-bit-12-x-1-14-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-r/#comments Sun, 31 Jan 2010 22:57:18 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/classical-moulding-router-bit-12-x-1-14-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-r/ 41yQ5loKa6L. SL160 Classical Moulding Router Bit 1/2 x 1 1/4 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/2″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Classical Moulding Router Bit 1/2″ x 1-1/4″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/classical-moulding-router-bit-12-x-1-14-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-r/feed/ 0 Roman Ogee Router Bit With Bearing 1/2″ x 1″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/roman-ogee-router-bit-with-bearing-12-x-1-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/ http://www.cuttinghandtools.com/roman-ogee-router-bit-with-bearing-12-x-1-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/#comments Sun, 31 Jan 2010 17:52:42 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/roman-ogee-router-bit-with-bearing-12-x-1-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/ 41gwmkk3o%2BL. SL160 Roman Ogee Router Bit With Bearing 1/2 x 1 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/2″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B: 1/2″
    D: 1-1/2″
    D1:
    H: 3/4″
    L1:
    R: 1/4″
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
    Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Roman Ogee Router Bit With Bearing 1/2″ x 1″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/roman-ogee-router-bit-with-bearing-12-x-1-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table/feed/ 0 Dragon Ball Router Bit 1/2″ x 1-1/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router http://www.cuttinghandtools.com/dragon-ball-router-bit-12-x-1-18-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/ http://www.cuttinghandtools.com/dragon-ball-router-bit-12-x-1-18-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/#comments Sun, 31 Jan 2010 12:41:46 +0000 CuttingHandTools http://www.cuttinghandtools.com/cutting-hand-tools/dragon-ball-router-bit-12-x-1-18-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/ 41AeeDZEgzL. SL160 Dragon Ball Router Bit 1/2 x 1 1/8 Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

  • Arbor:
    Diameter:
    Disc Type:
    Grit:
    Length:
    Machine: Hand Held or Table Router
    Material: Carbide Tipped
    Max RPM:
    Shank: 1/2″
    Tooth Count:
    Use: Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming.
  • A:
    2A:
    B: 1-1/8″
    D:
    D1:
    H:
    L1:
    R:
    R1:
    R2:
  • WARNING!
    To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
  • Shipping & Shipping Charges
    Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only). Heleta/Bullet Industries reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
  • Returns & Refunds
    Bullet Industries will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Bullet Industries.

Product Description
Bullet Industries’ quality bits are made to meet the high standards of today’s woodworker. We utilize high strength carbide tips to ensure a sharp and long lasting cut. Our high tech machinery enables us to create router bits with excellent stability, centricity, precision and symmetry. Grinding is accomplished with sophisticated CNC machines in a single clamping, producing a high quality tool. These bits are very competitively priced while offering a safe, long lasting tool…. More >>

Dragon Ball Router Bit 1/2″ x 1-1/8″- Used for Routing, carving, rounding over, milling, moulding, beading, coving, dove tailing, plunge cutting and flush trimming., with Hand Held or Table Router

]]> http://www.cuttinghandtools.com/dragon-ball-router-bit-12-x-1-18-used-for-routing-carving-rounding-over-milling-moulding-beading-coving-dove-tailing-plunge-cutting-and-flush-trimming-with-hand-held-or-table-router/feed/ 0