Cutting Hand Tools

• Heat treated carbon steel
• 1 Hex key wrench and 1 installation plate
• Saw sizes: 11/16-Inch, 15/16-Inch, 2-5/16-Inch, 3/4-Inch, 1-1/8-Inch, 1-3/4-Inch, 2-Inch, 20.5-Inch, 2-3/4-Inch, 3-Inch, 30.5-Inch, 4-Inch, 5-Inch
• 6 Mandrel bits, 4 Flat wood bits , 4 Fastener bits
• Cut perfect circles with these tools!

Product Description
This truly is a must have for anyone s tool collection. This 31 piece saw and drill bit set covers 1/8 of an inch all the way up to 5 inches and everything in between. Go on pick one up at this great rate and say goodbye to difficult hole cutting for good!   Features: Heat treated carbon steel Cut perfect circles with these tools! 1 Hex key wrench and 1 installation plate Saw sizes: 11/16″ 15/16″ 2-5/16″ 3/4″ 1-1/8″ 1-3/4″ 2″ 2.5″ 2-3/4″ 3″ 3.5″ 4″ 5″ Comes in new molded case 6 Mandrel bits 4 Flat wood bits 4 Forstner bits … More >>

Trademark Tools 75-3131 Hawk Loaded 31-Piece Hole Saw and Drill Bit Kit

• Hole sizes – 5/32″, 3/16″, 1/4”, 5/16”, 3/8” and 1/2″
• Nickle plated – Diamond coating
• Superior performance – Great for holes in marble, Slate, Glass, Tile etc.
• Made In China

Product Description
6 Pc Set, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″,1/2″. Set comes in plastic case…. More >>

SE Diamond Hole Saw Set 5/32 “- 1/2″

Product Description
Osborne arch punches are drop forged in one piece from the finest special carbon steel in sizes from 3/16″ to 2-1/4″ diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel and black enamel handle. The cutting edge is fully tempered all the way through and properly finished to provide long use trouble free punching. There is no other Hollow punch that can compare…. More >>

C.S.Osborne 5mm Arch Punch with Hardened Cutting Edge and Milled Clearing Hole

• Hardened cutting edge – milled clearing hole.
• Forged steel, round shank, barrel polished
• Belt style punches are made from steel bar.

Product Description
Cut a round hole or create a disc from a soft or fibrous material. Use on rubber, plastic, fabric, fiber, cork, leather or paper. Our punches are made to exacting specifications. Belt style punches are made from steel bar. The forming processes used to make these punches make them stronger than fabricated, two-piece welded punches. Finely, honed cutting edges make clean, smooth cuts from any material, while the inside taper of the barrel automatically clears punchings. Use our resilient punch pad for more impact absorption and protection of cutting edges. Diameter: 1/16″… More >>

C.S. Osborne 51460 1/16″ Belt Punch with Hardened Cutting Edge and Milled Clearing Hole

• Hardened cutting edge – milled clearing hole.
• Forged steel, round shank, barrel polished
• Belt style punches are made from steel bar.

Product Description
Cut a round hole or create a disc from a soft or fibrous material. Use on rubber, plastic, fabric, fiber, cork, leather or paper. Our punches are made to exacting specifications. Belt style punches are made from steel bar. The forming processes used to make these punches make them stronger than fabricated, two-piece welded punches. Finely, honed cutting edges make clean, smooth cuts from any material, while the inside taper of the barrel automatically clears punchings. Use our resilient punch pad for more impact absorption and protection of cutting edges. Diameter: 3/16″… More >>

C.S.Osborne 51474 3/16″ Belt Punch Hardened Cutting Edge Milled Clearing Hole

• Lightweight aluminum frame
• High speed bearings at top and bottom of drill shaft to assure perfect cutting balance and long cutting life.
• It will install into the chuck of a standard electric drill as small as 1/4-Inch
• Stores easily in a tool box
• Replaceable cutting bits

Product Description
Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4″ (6.4 mm). Lightweight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20-gauge (1.02 mm) galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12″ (51 to 305 mm) diameter holes. The larger HC2 model cuts 2 to 20″ (51 to 508 mm) holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for both models and both models use the same mill-type Cutter Bit and replacement parts… More >>

Malco HC-2 Sheet Metal Hole Cutter

• Have a variable-pitch teeth with a positive rake and a 1-5/8″ depth for cutting through metal, plastic and wood – much faster than conventional saws.
• Used in production, maintenance, electrical, and building trades.
• Made with hardened high speed steel teeth and tough alloy body and cap.
• Exceptional strength, durability and resistance.

Product Description
While Starrett is widely known for its precision tools, the company’s first saw blades appeared early in its history. Today, Starrett offers a broad line of industrial quality blades covering a vast array of applications. At Starrett, we continually test our blades against competitive products for performance and life-cycle. This diligence, coupled with our on-going tooth geometry and edge material research, assures the best possible blade life and performance…. More >>

BI-METAL HOLE SAW 1-3/8″

• 9 1/4″ Professional Leather Punch Plier
• Revolving Head and Replaceable Punch
• Sizes 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm

Product Description
9 1/4″ Professional Leather Punch Plier with Revolving Head and Replaceable Punch Sizes 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm… More >>

Leather Hole Punch Tool, Heavy Duty

Product Description
Features and Benefits: 13/16 in. diameter 1-7/16 in. depth of cutFor general construction, plumbing, eletrical and maintenance workBi-metal constructionHigh speed steel teeth electron beam welded to a steel bodyHigh alloy steel body construction for longer life… More >>

4/6 Super-Tough« Bi-Metal Hole Saw 13/16in.

Product Description
Features and Benefits: 11/16 in. (17 mm) diameter 1-7/16 in. depth of cutFor general construction, plumbing, eletrical and maintenance workBi-metal constructionHigh speed steel teeth electron beam welded to a steel bodyHigh alloy steel body construction for longer life… More >>

4/6 Super-Tough« Bi-Metal Hole Saw 11/16in.