• 13pc Professional Quality Wood Carver’s Chisel Set with Heavy-Duty Cloth Storage Satchel
• Set includes 8 Types of 8.5″ High Carbon Steel Wood Chisels with High Impact Plastic Handles
• Includes 2 Wood Rasp Files with Wooden Handles, 2 (6″x1/2″) Silicon Carbide Round Stone Files
• Double-Sided (Fine/Coarse) Stone Abrasive Block

Product Description
Professional Quality, Includes a Free Heavy Duty Cloth Pouch and a Sharpening Stone… More >>

SE 13 Pc Professional Quality Wood Carving Chisel Set

• Cut-out tool provides its users with first-rate performance and durability along with exceptional ergonomics
• Tool-free bit change for fast and easy bit changing without a wrench
• 26,000 rpm motor provides more cutting power
• Dust sealed switch provides durability and long switch life
• Includes: one general purpose bit, a drywall cutting bit, 1/4 and 1/8-inch collets (batteries and charger sold separately)

Product Description
18v cut out tool-bare. 18V cordless cut out tool operates 26,000 RPM to cut quickly and easily through drywall, plywood, ceramic tile, plexiglas, cement board, countertops, acoustical ceiling tile, and more. This cordless tool also features tool-free bi… More >>

Bare-Tool DEWALT DC550B 18-Volt Cordless Cut-Out Tool

• Non-Sparking, Non-Magnetic, Corrosion-Resistant
• Meets OSHA and NFPA Requirements For Use in Hazardous, Flammable or Combustible Environments
• Factory Mutual Approved
• Beryllium Free
• Lifetime Warranty

Product Description
For use in locations where flammable or combustible vapors, liquids, dusts or residues are present and near sensitive magnetic equipment…. More >>

Ampco 4-1242, Cutting Pliers, 9-7/8″

• Sold Individually

Product Description
Item #: 100-9-4476. For Unit = PCH-25
Customers also search for: Discount Anchor Tip Cutting , Buy Anchor Tip Cutting , Wholesale Anchor Tip Cutting , 604669205884, 9-4476, Plasma Tips… More >>

Anchor Tip Cutting Category: Plasma Tips

• Guaranteed Forever
• High carbon steel blade individually ground, polished, mirror finished and clear coated
• Nylon Projection-Interlock handle resists thinners and solvents
• Blade receives extra grinding for additional flexibility
• Full tang blade

Product Description
Black & Silver Joint Knife, 6″ SuperFlexx Joint Knife… More >>

Black & Silver Joint Knife, 6″ SuperFlexx Joint Knife

Product Description
Wiss Fiberglass scissors/shears are known for extremely high quality cutting with many years of use. Used predominantly for cutting fiberglass, these resharpenable shears are available in 10 and 12 sizes, in both left and right handed configurations…. More >>

Wiss Fiberglass Cutting Shears CTL-22N 12 inch Right Hand

Product Description
Wiss Fiberglass scissors/shears are known for extremely high quality cutting with many years of use. Used predominantly for cutting fiberglass, these resharpenable shears are available in 10 and 12 sizes, in both left and right handed configurations…. More >>

Wiss Fiberglass Cutting Shears CTL-20LHN 10 inch Left Hand

Product Description
With over 65 years of unsurpassed quality, FELCO is renowned the world over for providing top-quality pruning and cutting products for professionals and hobbyists alike. Made in Switzerland, FELCO products are designed and manufactured for ease-of-use, comfort, durability and adjustability. To lengthen the life of its tools, FELCO utilizes a spare parts system so that users can choose to replace individual parts rather than an entire tool. FELCO 210 Curved Cutting Head Loppers with Interchangeable Aluminum Fiber Tubes are the latest in unparalleled mastery of cutting edge technology. These loppers are available in your choice of sizes – 16, 20 or 24 inches.The cutting capacity of these curved cutting head loppers is 1.4 inches (35 mm).The curved cutting head on the FELCO 210 loppers allows for more of a slicing effect – reducing the effort needed for each cut – and features a slide resistant anvil blade. With the purchase of the 200 replacement blades (sol… More >>

FELCO 210 A Curved Cutting Head Expert Loppers with Aluminum Tubes-16in

Product Description
Allows You to Fabricate Your Most Common Cut-Outs with One Tool Easy to Use – Fits in Your Cutter and Pencil Pouch Uses Standard Perfect Score 41050 Glass Cutting Head The CRL B0T10 Break-Out Tool comes with a standard CRL 41050 Glass Cutting Head and an oil reservoir for smooth cutting. The B0T10 is a real time-saver. When used correctly it can eliminate steps normally taken to make your most common cut-outs, such as outlets and circles. It fits right in your cutter and pencil pouch, so it can stay right by your side until you’re ready to use it. Minimum Order: 1 Each… More >>

C.R. LAURENCE B0T10 CRL Break-Out Tool With Cutting Head

• Arbor: 1″
  Diameter: 16″
  Disc Type:
  Grit:
  Length:
  Machine: Gas Powered Saw
  Material: Fiber Bonded Aluminum Oxide
  Max RPM: 4800
  Shank:
  Tooth Count:
  Use: Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel
• WARNING!
  To prevent serious injury: Wear eye, face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.
• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they’re received before 12:00 noon CST.
• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item, please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

Product Description
Heleta’s abrasive metal cutting wheels are formulated with aluminum oxide grain and fiberglass reinforcement for heavy duty cutting. This formulation provides consistent, aggressive cutting and longer wheel life. We take great care to make sure our cutting wheels are well balanced which results in smoother vibration free grinding and cutting. Heleta utilizes an industry recognized icon system to help users identify the right bonded abrasive wheel for their application. There are also several key identifiers to look for on a Heleta’s wheel; RPM, wheel size, thickness, profile type and arbor size to ensure the correct product is used…. More >>

Abrasive Metal Cutting Wheel 16″ x 5/32″ x 1″- Used for Iron, Non-Ferrous Metals, Alloy Steel, Stainless Steel, with Hand Held Gas Powered Cut Off Saw