Cutting Hand Tools

• Individually tested to exceed standards
• High-leverage design provides 46-Percent greater cutting and gripping power than other plier designs
• Streamlined design with sure-gripping, cross-hatched knurled jaws
• Integral guards help prevent hand contact with conductive parts
• Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

Product Description
Cutters, Pliers & Accessories Overall Length: 9-5/8… More >>

Klein D213-9NE-INS Insulated High Leverage Side-Cutting Pliers, Orange

• Fineline technology provides 3 diamond ground cutting edges
• Comfortable non slip grip for extra sawing power
• Induction hardened teeth provides up to 5 times longer cutting life
• Cuts on both the pull and the push stroke for astest possible cut

Product Description
Ponys new line of high quality, affordable Hand Saws will be a welcome addition to your job site or workshop.Each ultra sharp tooth is diamond ground on three separate cutting faces and then is induction hardened to provide up to 5 times the life of standard saws. This Fineline Technology provides for faster, more accurate cuts. Each of these saws rubber trimmed handles fit well in the hand and youll find them comfortable, even after extended use…. More >>

Pony 66221 22-inch Hand Saw with 7 Teeth per Inch/8Ppi

• Ideal for concrete, masonry and building materials of all kinds
• Heavy-duty engine with specially coated cylinder working surfaces and two piston rings for optimum compression and long life
• Blade and guard can be mounted either in the center of the saw for optimum balance and maneuverability, or laterally (on the outside of the saw) when cutting is to be preformed along a wall, curbstone or other obstruction
• Vibration damping system based on a unique D2M mass system that absorbs vibrations caused by the engine & diamond wheel
• Maintenance-free electronic ignition, fully enclosed to protect against dust & humidity

Product Description
Industrial style 1-1/4″ blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, built-in tachometer/hour meter. Depth feed gauge indicator, one-piece box construction chassis made from 3/16″ hot-rolled steel will not flex during operation. Powder-coated chassis resists peeling & corrosion, two-piece cast aluminum guard assembly. Front-pivot design permits cuts to within 1″ (25mm) of walls and curbs, stainless steel water-cooling nozzles, guard can be positioned for left- or right-hand cutting. Heavy-duty hydro static transmission with variable speed drive, durable 8″x 2 1/4″ non-slip rubber wheels with maintenance-free hubs & roller bearing. Positive ball bearing screw feed depth feed with hand crank, forward travel speed: 0-80′/min… More >>

MK Diamond 157539 MK-1270 12-Inch 4 Horsepower Hand Held Masonry Gas Cutoff Saw

• Electronic coating to prevent rusting
• Perfectly mated cutter, heat treated to hold its edge
• Precision made of fine polished , high carbon drop forged steel
• Channellock Blue comfort grips
• Made in USA

Product Description
356 Len.: 6″, Price Each (part# 356) This item features: -Perfectly mated laser heat-treated cutter. -Cutting Direction: Straight. -Finish: Polish. -Jaw Material: High Carbon Steel. -Handle Material: Forged Steel. -Handle Type: Plastic-Dipped. -Type: Nipper. Len. = Overall Length… More >>

Channellock 356 6.25 -Inch End Cutting Plier

• Model 788
• Ideal for cutting 18-Gauge or lighter cold-rolled sheet steel
• Compound action results in maximum jaw power with minimum effort
• Threaded jaw bolt allows blades to be realigned after prolonged use
• Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

Product Description
54125 Style: Cutting Direction:Straight, Cutting Len.:1 1/2″ This item features: -Ideal for cutting 18-gauge or lighter cold-rolled sheet steel. -Compound action results in maximum jaw power with minimum effort. -Aviation snips threaded jaw bolt allows the blades to be realigned after prolonged use. -Length: 10 1/2 in. -Cutting Cap.: 18 gauge [Max]. -Cut Type: Shear Cut. -Handle Type: Straight. -Jaw Material: Forged Steel. -Applicable Materials: Leather, Rubber, Sheet Metal, Screening. -Wt.: 1 lb. -Price is for 1 Each…. More >>

Ridgid 54125 Straight-Cutting Aviation Snips

• Heat Treated , Drop Forged Alloy Steel Jaws
• Heat treated Handles with Rubber Grips
• Center Cut, Compound Action Jaws
• For Soft and Medium Hard Metals Only

Product Description
Bolt Cutters – * Hardened and tempered * Drop forged alloy steel jaws * Compound action Order Unit Each…. More >>

Olympia Tools 39-018 18″ Bolt Cutter, Center Cut

• Beta Code Number 017170025
• Comes with varnished wooden handles. Made from steel with high carbon content, heat treated to 61 HRC.
• Length 250mm

Product Description
The Ciceri family began producing tools in Northern Italy in the 1880s. Today, family owned Beta, or Beta Utensili is known for its direct involvement in Grand Prix racing, a relationship that dates back to the early 1970s…. More >>

Beta 1717 A250 Scrapers with Two 100mm Cutting Edges

• Makita-built motor produces 3,400 RPM for faster cutting in a wide range of metals including Unistrut all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more
• Compact, ergonomic design at 13-3/4-inches long; weighs only 5.7 lbs. for reduced operator fatigue
• A built-in L.E.D. light conveniently illuminates the work area
• Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
• 3-year warranty on tool; 1-year warranty on batteries and charger.

Product Description
The Makita BCS550 18-Volt 5-3/8-Inch Metal Cutting Saw Kit provides fast cutting at 3,400 RPMs and is ideal for metal building, metal fabrication, plumbing, metal roofing and much more. It has a cutting capacity of 2 inches. The ergonomic shape provides a comfortable grip and allows even pressure and effortless control. This saw kit also features built-in LED lights to illuminate your work area and a li-ion battery that provides a long run time. The rapid optimum charger has a built-in fan that cools the battery to avoid overheating.This saw kit includes: two li-ion 3.0 Ah batteries, a rapid charger, a carbide-tipped 30T blade, and a tool case. For consumer confidence, the tool is backed by a three-year warranty and the battery has a one-year warranty. The compact design is lightweight and easy-to-maneuver, measuring only 12 inches in length and weighing just 6.4 pounds.Amazon.com Product Description
The Makita 18V LXT Lithium-Ion Cordless 5-3/8-… More >>

Makita BCS550 18-Volt LXT Lithium-Ion Cordless 5-3/8-Inch Metal Cutting Saw Kit

• Cuts steel, aluminum, wood & plastics using a single blade.
• 7-1/4″ Blade capacity
• Powerful 1050W motor
• Cuts up to 33′ of 1/8″ mild steel!
• Bevel tilt from 0-45 degrees

Product Description
Evolution Fury, 7-1/4′, TCT, Multipurpose, Circular Saw, Cuts Steel, Aluminum, Wood, Even With Nails In & Plastics Using The Rage Technology, Fury Is Part Of The Evolution’s Newest Division & Is Made For The Do It Yourselfer Market, It’s An Ideal Replacem… More >>

Evolution Power Tools FURY 7-1/4-Inch Multipurpose Cutting Circular Saw

• Resin bond formulation and diamond chip mix provide for chip free production glass cutting
• Resin bond formulation and diamond chip mix also provides for the elimination of breakout when cutting glass tubing
• Supreme grade metal bond diamond blade for cutting glass

Product Description
156651 Blade Size: 7″ Features: -Wet Cutting Continuous Rim Diamond Blade MK-215GL. -Supreme grade, metal bond blades for chip – free, production glass cutting. Specifications: -Item # 156651 – Diameter: 7”, Width: .060” , Arbor: 5/8”, Weight: 1 lbs. -Item # 155949 – Diameter: 8”, Width: .060” , Arbor: 5/8”, Weight: 1 lbs. -Item # 155950 – Diameter: 10”, Width: .050”, Arbor: 5/8”, Weight:1.05 lbs. -Item # 155971 – Diameter: 12”, Width: .080”, Arbor: 1”, Weight: 2.7 lbs. -Rim height: 0.28” (7 mm)…. More >>

MK Diamond 156651 MK-215GL 7-Inch Supreme Grade Diamond Blade for Cutting Glass