Cutting Hand Tools

• Oscillating motion outperforms the conventional orbital action; efficiency for tightest spots, corners and inaccessible areas
• Size 2-1/2-Inch (65 millimeter) 13/32-Inch (10 millimeter) arbor includes attachment washer

Product Description
Diamond Cutting Blade 2 1/2″ diameter (65 mm), bore 13/32” (10 mm) Cuts marble, bricks, dry wall along with many other materials. The semi-circular shape facilitates cutting right into corners or adjoining surfaces without over cutting. Incl. attachment washer…. More >>

Proxxon 28902 Diamond Cutting Blade for OZI 115/E

Product Description
Heavy Duty Diagonal Cutting Pliers – 7 In Drop-forged, heat treated and hand sharpened for maximum strength and durability. Specifications: Overall Length – 7″ Caution: Vinyl covered handles do not provide insulation against electrical shock from live wires…. More >>

Heavy Duty Diagonal Cutting Pliers – 7 In

• Rugged, general use tool
• Ideal for cutting or pulling of nails and wire
• Hardened cutting edges
• Drop-forged from high-quality steel
• Black finish and polished head

Product Description
* Rugged, general use tool * Ideal for cutting or pulling of nails and wire * Hardened cutting edges * Drop-forged from high-quality steel * Black finish and polished head * 8″ length * Carded… More >>

Coopertools GG08H 8-Inch Heavy Duty End Cutting Nippers

• 1/2 inch diameter cutting capacity
• Comfortable molded grips
• Hardened and tempered precision ground steel blade with nonstick coating
• Dual sided safety catch
• Adjustable tension

Product Description
Anvil provides a flat surface for even contact with cutting blade. Ideal for cutting dry, hard stems and branches. Hardened and tempered, precision ground steel blade with rustproof EverCut coating. Replaceable anvil. Extra strong oval steel handles with cushioned grips. 16 page pruning guide included…. More >>

Gilmour Telescoping Anvil Lopper 1-1/4-Inch Cutting Capacity #1149

• Diamond blade designed for cutting ceramics, fiberglass, reinforced plastics

Product Description
Diamond coated 3 11/32″ (85 mm) diameter x 1/64″ x 13/32″ bore (0.5 x 10 mm). Used on circuit boards or glassfiber reinforced plastics (GRP)…. More >>

Proxxon 28735 85mm Diamond Coated Cutting Blade for FKS/E

• Non-Sparking, Non-Magnetic, Corrosion-Resistant
• Meets OSHA and NFPA Requirements For Use in Hazardous, Flammable or Combustible Environments
• Factory Mutual Approved
• Made in the USA, Beryllium-Free
• Lifetime Warranty

Product Description
For use in locations where flammable or combustible vapors, liquids, dusts or residues are present and near sensitive magnetic equipment…. More >>

Ampco P-35, Linemans’ Pliers, 8-1/2″

• 8-1/2-Inch thin wall cutter wheel
• Use with PVC and steel
• Model No.: E258-T
• Weight: 2-Pound
• Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Product Description
8 1/2″ Thin Wall Cutter Wheel Only (PVC and Steel)2 1/2″ to 8″ Diameter Pipe – Patented Performance. The RIDGID Model 258 Power Pipe Cutter cuts 21/2″ to 8″ schedule 10*/40 steel pipe, galvanized pipe, rigid conduit etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21 or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while a second operator uses a grinder to bevel the pipe.Product Features: Square cut 21 or nipple lengths of pipe without effort.Easily cuts by displacing instead of removing pipe material.No abrasive dust, dangerous sparks, or open flame.Quickly cuts steel pipe with minimal burr.Great for cutting pip… More >>

Ridgid 58222 Thin Wall Cutter Wheel

• Model No.: 153
• Standard Wheel: E-3469
• Capacity: 1-1/4-Inch-3-1/2-Inch
• Weight: 2-Pound
• Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Product Description
# Quick-Acting Design
# I-Beam construction
# Hardened wear surfaces.
# Thrust bearing slide assemblies
for smooth operation.
# Models 151 and 152 feature fold-away reamers.
# Capacity: 1/4″ – 6 5/8″
# Weight: 7/8 lb – 4 1/8 lbs… More >>

Ridgid 36597 Quick-Acting Tubing Cutter

• Model No.: PCB-1375
• Replacement blade
• Hardened steel cutting blade
• Weight: 1/8-Pound
• Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Product Description
Item #: 632-25588.
Customers also search for: Discount Pc-1375 Replacement Blade, Buy Pc-1375 Replacement Blade, Wholesale Pc-1375 Replacement Blade, 095691255884, 25588, Pipe Cutter Parts and Accessories… More >>

Ridgid 25588 PC-1375 Replacement Blade

• Model No.: 138
• Replacement blade
• Standard Pack: 1
• Weight: 1/8-Pound
• Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Product Description
Tubing Cutter Replacement Parts… More >>

Ridgid 92170 Replacement Blade